Alternative für One Shot, Dillon Case Lube

  • Hallo,


    die Originalprodukte finde ich überteuert, daher habe ich mich mal auf die Suche gemacht nach einer Alternative.


    Man wird dank WWW. ja auch recht schnell fündig z.B. hier:


    http://www.frfrogspad.com/homemade.htm


    Spray Lube


    The spray-on case lubes are probably the best thing to happen to reloading in
    years. You can make your own spray case sizing lube in bulk by mixing
    liquid lanolin and 99% isopropyl alcohol. (While you can (kind of) use 91%
    isopropyl alcohol, its higher water content causes the lanolin to
    settle out and it must be shaken frequently during use.

    NOTE:
    The more common
    70% isopropyl "rubbing alcohol" will not work at all as its water content is much to
    high, nor will


    denatured alcohol. work. You need to use pure liquid lanolin as the
    fatty solids in anhydrous lanolin will settle out in the alcohol


    Liquid lanolin, which is a refined
    lanolin oil with the solid fats removed (the reason why solid anhydrous lanolin
    doesn't work well in this application) is available from health food stores and
    sources specializing in ingredients for cosmetics. You want to get pure
    liquid lanolin without additives. Online sources include VitaGlo (http://www.vitaglo.com/7730.html)
    or try "Amazon.com" for other suppliers.



    I just recently discovered
    that my
    local Safeway store carries 99 percent isopropyl in their drug/cosmetic
    isle for
    about $2.50 for a 16 ounce bottle. Ninety-nine percent isopropyl
    alcohol is also
    available from
    many large paint stores (used for some finishes), some electronics
    stores (it's used for cleaning electronics) or local industrial chemical
    suppliers.


    A solution of 1 part liquid lanolin and
    4 to 5 parts parts 99 percent isopropyl alcohol (4 oz of liquid lanolin to16 -
    20 oz of isopropyl) works well. When mixing you may find that the lanolin mixes
    better if you warm both the alcohol and lanolin in a bath of warm water to about
    105 - 110 degrees F before mixing.
    DONOT WARM
    EITHER OF THEM OVER AN OPEN FLAME!

    Once the solutions are warm, pour together, mix thoroughly, allow the mix to
    cool (mix occasionally as it cools) and store in an air tight container to
    prevent water from being absorbed by the isopropyl.


    For a spray bottle you can use an old
    commercial spray lube bottle or an old pump hair spray bottle that has been
    thoroughly cleaned. To apply the lube, spread the cases in a single layer on a
    clean surface like an oven tray (those disposable aluminum oven liner trays are great and prevent
    the wrath of your chef when it is discovered that the cookie trays were used)
    and lightly and evenly spray the cases. Allow the cases to sit for a
    couple of minutes, roll the cases around and lightly spray again. Wait
    until the alcohol has evaporated (about 5 minutes) and start sizing.
    Properly lubed cases will have a slightly greasy feel to them without feeling
    slimy.



    Another neat idea for spraying the cases is to put them in a plastic bag,
    spray, and then mix the cases, dump out on some newspaper, and let dry.
    Less messy than putting the cases on an oven tray and less likely to get you in
    trouble with the head chef.



    Nach dieser Info habe ich mal geschaut was Isopropylalkohol beim Laborbedarf kostet...viel zu teuer.


    Ok Ebay angesteuert und dann unter anderem das hier gefunden

    http://www.ebay.de/itm/30-L-IS…e&hash=item565cb7b403</a>


    30 Liter 58,50€ = 1,95€/ L
    10 Liter 20,90€ = 2,09€/ L


    kleinere Gebinde gibt es natürlich auch.


    Nun fehlt noch das Lanolin. Da habe ich schon etrwas ausprobiert und eine Quelle gefunden, bin gerade dran ob die auch kleinere Gebinde verkaufen.
    Momentan sind es ausnahmsweise 25kg als kleinste Einheit. Man wäre aber bereit bei entsprechender Nachfrage 1l oder 5l anzubieten.
    Preise sind auf jedenfall lukrativ.
    Gemisch von 1 Teil Lanolin mit 12 Teilen IPA funktioniert super :thumbup:


    Bei Interesse einfach melden, ich bin in Email Kontakt mit dem Hersteller.

  • Willst du gerade 25kg lanolien kaufen oder hast dus schon gekauft und willst es loswerden


    Das kannst du auch im 200g pack in der apotheke für kleines geld erwerben nennt sich wollfett


    Ich habe eine dose und trage es hauchdünn mit den fingern auf gefüllt müsste dieses döschen bis an mein lebensende reichen.


    Das was oben beschrieben ist war das einzige was ich bei meinem wiederladekurs gelernt habe.

    :la:
    Wer Rechtschreibfehler findet darf sie behalten

  • Ja ich habe mir ein Muster schicken lasssen ist aber flüssiges Isopropyllanolat, es hat laut Hersteller eine deutlich bessere Spreitwirkung als Lanolin, also Wollwachs.
    Habe heute mal angefragt wie das mit kleineren Mengen aussieht.
    Werde berichten wenn ich eine Antwort bekommen sollte.

    • Offizieller Beitrag

    wegen dem Lanolin Oel ??

    Ich nutze für meine Mischung normales 99,9% reines Lanolin.
    10:1 in einen Kunststoff Behälter mit 99,9% tigem Isopropanol und dann in Warmem Wasser das Lanolin verflüssigen.
    Einmal flüssig bleibt es das auch. Vor Gebrauch einfach mal schütteln.

    Gruß
    Karl-Heinz

    Ich tue Recht und scheue keinen Feind.


    Jeder Wiederlader handelt eigenverantwotlich, alle Ladedaten ohne Gewähr


    Am Crimp hat es nicht gelegen....war keiner drauf.


    Egal was ich tue, für irgendjemand auf diesem Planeten ist es das Falsche.


    Neue Frage -------> Neues Thema.

    • Offizieller Beitrag


    Einmal flüssig bleibt es das auch. Vor Gebrauch einfach mal schütteln.

    ich hab die letzte Mischung durch einen Teefilter laufen lassen. Die Mischung bleibt danach klar und die Schwebstoffe bleiben im Filter hängen ;)