Ja ich habe mir ein Muster schicken lasssen ist aber flüssiges Isopropyllanolat, es hat laut Hersteller eine deutlich bessere Spreitwirkung als Lanolin, also Wollwachs.
Habe heute mal angefragt wie das mit kleineren Mengen aussieht.
Werde berichten wenn ich eine Antwort bekommen sollte.
Beiträge von .400Corbon
-
-
Hallo,
die Originalprodukte finde ich überteuert, daher habe ich mich mal auf die Suche gemacht nach einer Alternative.
Man wird dank WWW. ja auch recht schnell fündig z.B. hier:
http://www.frfrogspad.com/homemade.htm
Spray Lube
The spray-on case lubes are probably the best thing to happen to reloading in
years. You can make your own spray case sizing lube in bulk by mixing
liquid lanolin and 99% isopropyl alcohol. (While you can (kind of) use 91%
isopropyl alcohol, its higher water content causes the lanolin to
settle out and it must be shaken frequently during use.NOTE:
The more common
70% isopropyl "rubbing alcohol" will not work at all as its water content is much to
high, nor willdenatured alcohol. work. You need to use pure liquid lanolin as the
fatty solids in anhydrous lanolin will settle out in the alcoholLiquid lanolin, which is a refined
lanolin oil with the solid fats removed (the reason why solid anhydrous lanolin
doesn't work well in this application) is available from health food stores and
sources specializing in ingredients for cosmetics. You want to get pure
liquid lanolin without additives. Online sources include VitaGlo (http://www.vitaglo.com/7730.html)
or try "Amazon.com" for other suppliers.I just recently discovered
that my
local Safeway store carries 99 percent isopropyl in their drug/cosmetic
isle for
about $2.50 for a 16 ounce bottle. Ninety-nine percent isopropyl
alcohol is also
available from
many large paint stores (used for some finishes), some electronics
stores (it's used for cleaning electronics) or local industrial chemical
suppliers.A solution of 1 part liquid lanolin and
4 to 5 parts parts 99 percent isopropyl alcohol (4 oz of liquid lanolin to16 -
20 oz of isopropyl) works well. When mixing you may find that the lanolin mixes
better if you warm both the alcohol and lanolin in a bath of warm water to about
105 - 110 degrees F before mixing. DONOT WARM
EITHER OF THEM OVER AN OPEN FLAME!
Once the solutions are warm, pour together, mix thoroughly, allow the mix to
cool (mix occasionally as it cools) and store in an air tight container to
prevent water from being absorbed by the isopropyl.For a spray bottle you can use an old
commercial spray lube bottle or an old pump hair spray bottle that has been
thoroughly cleaned. To apply the lube, spread the cases in a single layer on a
clean surface like an oven tray (those disposable aluminum oven liner trays are great and prevent
the wrath of your chef when it is discovered that the cookie trays were used)
and lightly and evenly spray the cases. Allow the cases to sit for a
couple of minutes, roll the cases around and lightly spray again. Wait
until the alcohol has evaporated (about 5 minutes) and start sizing.
Properly lubed cases will have a slightly greasy feel to them without feeling
slimy.Another neat idea for spraying the cases is to put them in a plastic bag,
spray, and then mix the cases, dump out on some newspaper, and let dry.
Less messy than putting the cases on an oven tray and less likely to get you in
trouble with the head chef.Nach dieser Info habe ich mal geschaut was Isopropylalkohol beim Laborbedarf kostet...viel zu teuer.
Ok Ebay angesteuert und dann unter anderem das hier gefunden
http://www.ebay.de/itm/30-L-IS…e&hash=item565cb7b403</a>30 Liter 58,50€ = 1,95€/ L
10 Liter 20,90€ = 2,09€/ Lkleinere Gebinde gibt es natürlich auch.
Nun fehlt noch das Lanolin. Da habe ich schon etrwas ausprobiert und eine Quelle gefunden, bin gerade dran ob die auch kleinere Gebinde verkaufen.
Momentan sind es ausnahmsweise 25kg als kleinste Einheit. Man wäre aber bereit bei entsprechender Nachfrage 1l oder 5l anzubieten.
Preise sind auf jedenfall lukrativ.
Gemisch von 1 Teil Lanolin mit 12 Teilen IPA funktioniert superBei Interesse einfach melden, ich bin in Email Kontakt mit dem Hersteller.
-
Danke, braucht dann jemand einen Matritzensatz
-
Gibt es was Neues im Bezug zur Sammelbestellung, brauche ja auch noch Geschosse.
-
Habe hier DillonConversion Kit und Matritzensatz.
Mein ich das nur oder kann ich diese für 9mm Para nehmen? -
Angesehen hab ich mir den Bulletfeeder bei DAA auch schon. Ich versteht nur nicht die Begrenzung auf die angebotenen Kaliber.
Mich würde .38 spl. und .357 Mag. interessieren. -
Jo ich weiß' hab schon Pulver gekauft
Danke trotzdem für den Hinweis.
Bin auch schon Fan, die Presse ist schon alter und schon gleich war was defekt.
Habe eine Mail geschickt und innerhalb kürzester Zeit kam Post aus den USA.
Und das für lau. Top Service. -
-
Danke für die Aufnahme hier und hab sicherlich noch einige Fragen.
-
Anfangs mit einer Lee Classic Turret, seit 1 Woche aber mit einer Dillon 650 mit Hülsen- und Geschosszuführung Kaliber lade ich nur. 40 S&W
Hallo Uwe,
was hast du für eine Geschoßzufuhr? RCBS, Hornady, Mr. Bulletfeeder...?
-
Steckbrief
Wohnort: linker Niederrhein kurz vor den Niederlanden
Bedürfnis: Schütze im BDS und BDMP (KW u. LW) sowie Jäger.
Wie ich zum "Stopfen" gekommen bin:
In den üblichen Foren über das Wiederladen gelesen und mal so im Verein rumgefragt, ob das jemand macht.
Und wie das Glück es so will, wollten zwei ältere Kameraden ihre Ausstattung verkaufen.
Was soll ich sagen, nicht lange gefackelt und das ganze übernommen.
So bin ich in den Besitz einer Dillon 650 und jeder Menge an Zubehör gekommen.
Dann mal fix angemeldet und den WL- und VL - Schein gemacht.
Die Prüfung war heftig, fast ein Drittel sind durchgefallen trotz mündlicher Nachprüfung, was ich nicht gedacht hätte.
Das größte Problem war aber, meiner Holden klar zu machen das der Kelleraum (Mehrfamilienhaus) ein wenig umgebaut werden muß und ein ein weiterer Schrank
mit einem komischen Aufkleber dort stehen sollte.Spass hat mit auch das Amt gemacht, man hat das WL beschränkt auf die in der WBK eingetragenen Kaliber, SP nur für Vorderladerwaffen und SP Ersatzstoffe obwohl beantragt nicht eingetragen.
Nunja nach einigen "netten" Schriftwechseln und Telefonaten, wurde eine neuen Erlaubnis ausgestellt ohne jedwede Einschränkung.Zu meiner Schande muß ich gestehen, das ich noch nicht angefangen habe zu Laden.
Nun bin ich durch Youtube Videos wieder "aufgewacht" und möchte die nahende dunkle Zeit
nutzen um damit zu starten.Ich hoffe das schafft euch mal einen kleinen Überblick, ansonsten fragen.